Permit Application Forms
State of NJ Construction Forms and Instructions
The most commonly requested permit application forms may be filled out on your computer, saved to your hard drive and/or printed out.
Completed forms and required documentation can be scanned and emailed to kcoffey@morrisplainsboro.org or dropped off at the Borough Annex.
Construction Office
Borough Annex
531 Speedwell Avenue
Monday – Friday from 8:30 a.m. until 4:30 p.m.
973-538-0325.
Below is a description of some of the most common forms.
UCC-F170 Construction Permit
The UCC-F170 Construction Permit needs to be submitted with each permit application. It should describe the type of work you are planning to do, provide the work site and contractor information, and the estimated cost of work.
UCC-F100 Construction Permit Application
The UCC-F100 Construction Permit Application (PDF) form needs to accompany the subcode technical sections. Please be sure the certification in lieu of oath is signed.
UCC-F110 Building Subcode Technical Section
The UCC-F110 Building Subcode Technical Section is to be used for roofing, siding and decks, interior and exterior construction.
UCC-F120 Electrical Subcode Technical Section
The UCC-F120 Electrical Subcode Technical Section should be used for all electrical work related to a project. A licensed electrician must sign and seal the application unless the work is being completed by the homeowners in an owner occupied single family dwelling.
UCC-F130 Plumbing Subcode Technical Section
The UCC-F130 Plumbing Subcode Technical Section should be used for all plumbing work related to a project. A licensed plumber must sign and seal the application unless the work is being completed by the homeowners in an owner occupied single family dwelling.
UCC-F140 Fire Protection Subcode Technical Section
The UCC-F140 Fire Protection Subcode Technical Section is required for any fire protection work being performed. Please be sure the certification in lieu of oath (Section C) is signed.
UCC-F370 Chimney Verification for Replacement of Fuel-Fired Equipment
The UCC-F370 Chimney Verification for Replacement of Fuel-Fired Equipment needs to be completed for any replacement or newly installed furnaces, boilers, fireplaces, water heaters or chimney liners. If a new chimney liner is being installed, please also provide the specifications on the liner.
UCC-F145 Mechanical Subcode Technical Section
The UCC-F145 Mechanical Subcode Technical Section is to be used for Furnace Replacements and Chimney Liners.
UCC-F390 Framing Checklist
The UCC-F390 Framing Checklist is required for any new building construction or additions. Builder checks boxes marked “B” and the responsible person in charge of work signs and dates. This form is to be presented to the building inspector when the framing inspection is scheduled.